API 570 Training--Piping Inspector Course


Download Brochure
Monday November 21, 2016 | Uday B. Kale | Kuala Lumpur, Malaysia
WorldOils

Upcoming Course

Code Start Date End Date Location Cost Instructor Register
PST0194-201603  21 Nov 2016  25 Nov 2016  Kuala Lumpur, Malaysia  SGD 3195  Uday B. Kale   Register

Past Course

Code Start Date End Date Location Cost Instructor Register
PST0194  05 Nov 2012  09 Nov 2012  Kuala Lumpur, Malaysia  SGD 2995  Uday B. Kale 
PST0194   24 Jun 2013  28 Jun 2013  Kuala Lumpur, Malaysia  SGD 2995  Uday B. Kale 
PST0194-201401   17 Feb 2014  21 Feb 2014  Kuala Lumpur, Malaysia  SGD 2995  Uday B. Kale 
PST0194-201402  02 Jun 2014  06 Jun 2014  Bandung, Indonesia  SGD 2995  Uday B. Kale 
PST0194-201403   03 Nov 2014  07 Nov 2014  Kuala Lumpur, Malaysia  SGD 2995  Uday B. Kale 
PST0194-201501  16 Mar 2015  20 Mar 2015  Kuala Lumpur, Malaysia  SGD 3195  Uday B. Kale 
PST0194-201502  25 May 2015  29 May 2015  Bandung, Indonesia  SGD 3195  Uday B. Kale 
PST0194-201503  07 Sep 2015  11 Sep 2015  Jakarta, Indonesia  SGD 3195  Uday B. Kale 
PST0194-201601  07 Mar 2016  11 Mar 2016  Kuala Lumpur, Malaysia  SGD 3195  Uday B. Kale 
PST0194-201602  01 Aug 2016  05 Aug 2016  Bandung, Indonesia  SGD 3195  Uday B. Kale 
Monday November 21, 2016 | Uday B. Kale | Kuala Lumpur, Malaysia

American Petroleum Institute (API) Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification Program (PICP) is developed for the continual high level of efficiency and safety through emphasizing professional credibility and process integrity.

Process piping system is one of the critical production assets in process industry. Organizations recognize the need to maintain authorized inspection agency and technically assess qualified piping engineers and inspectors to ensure facilities are at top performance. Therefore, API 570 certification is one of the most sought after professional competency that enables inspectors to be actively involved in the improvement of industry & environmental health and safety performance, reinforcement management control, compliance of inspection capabilities.

This 5 day Piping Inspector course is based on API 570/574, API RP 577/ 578, ASME B16.5/ B31.3 and ASME BPVC Section V/ Section IX. It is to promote the recognition of fitness-for-service concepts to evaluate in-service degradation of piping system. With Mr. Uday Kale’s extensive involvements in the facilities inspection, as well as his practical coaching and mentoring approaches, this course not only prepare the candidates to pass API 570 examination with confident, it will also advance the appreciation of piping facilities and thus to broaden the technical knowledge base in order to avoid unplanned shutdown and reduce expenses!

Each attendee must bring a Laptop computer with Microsoft operating system and Scientific Calculator

Monday November 21, 2016 | Uday B. Kale | Kuala Lumpur, Malaysia

Day 1

  • BENCH-MARK QUIZ INTRODUCTION TO API 570 CERTIFICATION
  • ASME B 31.3 (Process Piping)
  • ASME B16.5 (Pipe Flanges and Flanged Fittings)

Day 2

  • ASME B16.5 (Pipe Flanges and Flanged Fittings)
  • API 570 (Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems)

Day 3

  • API 570 (Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems)

Day 4

  • ASME Boiler and Pressure Vessel Code Section IX (Welding and brazing Qualifications)
  • ASME Boiler and Pressure Vessel Code Section V (Non-Destructive Examination)
  • API Recommended Practice 574

Day 5

  • API RP 571 (Damage Mechanisms in the Refining Industry)
Monday November 21, 2016 | Uday B. Kale | Kuala Lumpur, Malaysia
  • API 570: Inspection methodologies, remaining life calculations, degradation mechanisms, repair & re-rating of in-service piping system and relations to ASME codes (1.5 day)
  • ASME Section V: Principles and application of Non-Destructive Examination (0.5 day)
  • ASME section IX: Welding & brazing requirements and procedures (0.5 day)
  • ASME B31.3: Design review, welding & heat treatment, inspection, leak testing of process piping (1 day)
  • ASME B16.5: Design & repair of pipe flanges and flanged fittings (0.5 day)
  • API RP 571: Damage Mechanisms affecting fixed equipment in refineries, eg. fractures, fatigue, corrosion, sulfidation, MIC, HTTA etc (0.5 day)
  • API 574: Inspection practices for piping system components (¼ day)
  • API RP 577: Welding inspection and metallurgy recommended practices (¼ day)
  • API RP 578: Material verification program for new and existing alloy piping systems (¼ day)
Monday November 21, 2016 | Uday B. Kale | Kuala Lumpur, Malaysia

This course will specifically benefit Engineers, Supervisors, and Managers from the following disciplines:

  • Mechanical Engineering
  • Inspection
  • Maintenance & Operations
  • Technical & Engineering
  • QAQC

and technical personnel with 2-3 years of experience in the management and planning of inspection and maintenance activities of piping system at upstream oil & gas facilities, refineries, process plants and petrochemical facilities.

Monday November 21, 2016 | Uday B. Kale | Kuala Lumpur, Malaysia

Uday B. Kale (M. Eng. Mechanical)

Technical Director - KUB Quality Services

Biography

Uday B. Kale is a Post Graduate Mechanical Engineer with experience in Inspection, Welding and NDE/NDT projects for last 18 years. Currently he is the technical director of M/s KUB Quality Services. He has involved in inspection, welding and NDT projects in the Middle East, Africa and India on offshore production platform and petrochemical refineries. He has vast experience in Manufacturing and In Service Inspection of Static Equipment used in Oil and Gas.

Mr. Uday is very well-versed in international Codes and Standards. He performed and led the shutdown teams in performing NDE, internal and external inspection of equipments in central processing plant, ammonia plant, FCCU, SRU, SWS and amine treating units for Code stamp facilities of ADCO, Qatar Petroleum, Oil India, QAFAC, Banagas, Al Jubail Fertilizer Company, and other various units of Refineries, Petrochemicals, Gas Plant and Fertilizer Plant and so on.

He was a lead API inspector for various shutdown and Turnaround. He was also the appointed plant inspector for BP (GUPCO) in asset integrity management, who took charge of 9 offshore production complex, 75 Satellites and Onshore process units involving Close Visual Inspection of piping, equipments, NDT co-ordination, Baseline and Corrosion Monitoring. Furthermore, as an Inspector in GASCO OAG pipeline project, he conducted and witnessed Ultrasonic Examination of first 50 production weld joints of pipeline done by PWT (Pipe Welding Technology, GMAW).