API 570 - Piping Inspector Course Online Training
API 570 course overviews piping inspection code 570 repair, alteration and rerating of in-service piping systems. This 5-day training held in Indonesia & Malaysia
Level
Intermediate
Type
Online
Trusted by Leading Companies
Our training programs are promoted to engineers, supervisors, and technical teams across the globe, supporting their continuous development and operational competency.
About Training
American Petroleum Institute (API) Piping Inspection Code 570 Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems is recognized and used with confidence worldwide. The Piping Inspector Certification Program (PICP) is developed for the continual high level of efficiency and safety by emphasizing professional credibility and process integrity.
Process piping system is one of the critical production assets in the process industry. Organizations recognize the need to maintain an authorized inspection agency and technically assess qualified piping engineers and inspectors to ensure facilities are at top performance. Therefore, API 570 certification is one of the most sought-after professional competencies that enables inspectors to be actively involved in the improvement of industry & environmental health and safety performance, reinforcement management control, and compliance with inspection capabilities.
This 5-day Piping Inspector course is based on API 570/574, API RP 577/ 578, ASME B16.5/ B31.3, and ASME BPVC Section V/ Section IX. It is to promote the recognition of fitness-for-service concepts to evaluate the in-service degradation of piping systems. With Mr. Uday's extensive involvement in the facilities inspection, as well as his practical coaching and mentoring approaches, this course not only prepare the candidates to pass the API 570 examination with confidence but will also advance the appreciation of piping facilities and thus broaden the technical knowledge base in order to avoid an unplanned shutdown and reduce expenses!
Training Objectives
- API 570: Inspection methodologies, remaining life calculations, degradation mechanisms, repair & re-rating of the in-service piping system, and relations to ASME codes (1.5 days)
- ASME Section V: Principles and Application of Non-Destructive Examination (0.5 days)
- ASME section IX: Welding & brazing requirements and procedures (0.5 days)
- ASME B31.3: Design review, welding & heat treatment, inspection, leak testing of process piping (1 day)
- ASME B16.5: Design & repair of pipe flanges and flanged fittings (0.5 days)
- API RP 571: Damage Mechanisms affecting fixed equipment in refineries, eg. fractures, fatigue, corrosion, sulfidation, MIC, HTTA, etc (0.5 days)
- API 574: Inspection practices for piping system components (¼ day)
- API RP 577: Welding inspection and metallurgy recommended practices (¼ day)
- API RP 578: Material verification program for new and existing alloy piping systems (¼ day)
Audiences
This course will specifically benefit Engineers, Supervisors, and Managers from the following disciplines:
Mechanical Engineering
Inspection
Maintenance & Operations
Technical & Engineering
QAQC
and technical personnel with 2-3 years of experience in the management and planning of inspection and maintenance activities of the piping systems at upstream oil & gas facilities, refineries, process plants, and petrochemical facilities.
Each attendee must bring a Laptop computer with the Microsoft operating system and Scientific Calculator
Instructor
UB
Uday B. Kale
Uday B. Kale is a Post Graduate Mechanical Engineer with experience in Inspection, Welding and NDE/NDT projects for last 19 years. Currently he is the technical director of M/s KUB Quality Services. He has involved in inspection, welding and NDT projects in the Middle East, Africa and India on offshore production platform and petrochemical refineries. He has vast experience in Manufacturing and In Service Inspection of Static Equipment used in Oil and Gas.
Mr. Uday is very well-versed in international Codes and Standards. He performed and led the shutdown teams in performing NDE, internal and external inspection of equipments in central processing plant, ammonia plant, FCCU, SRU, SWS and amine treating units for Code stamp facilities of ADCO, Qatar Petroleum, Oil India, QAFAC, Banagas, Al Jubail Fertilizer Company, and other various units of Refineries, Petrochemicals, Gas Plant and Fertilizer Plant and so on.
He was a lead API inspector for various shutdown and Turnaround. He was also the appointed plant inspector for BP (GUPCO) in asset integrity management, who took charge of 9 offshore production complex, 75 Satellites and Onshore process units involving Close Visual Inspection of piping, equipments, NDT co-ordination, Baseline and Corrosion Monitoring. Furthermore, as an Inspector in GASCO OAG pipeline project, he conducted and witnessed Ultrasonic Examination of first 50 production weld joints of pipeline done by PWT (Pipe Welding Technology, GMAW).
With his extensive involvement in various projects, Mr. Uday is also an enthusiastic and knowledgeable mentor, who has been a faculty in training, examination, qualification and certification of API 510 & 570, ASME B31.3, API653, welding and NDT in the Middle East, Africa and Asia. He is a charted engineer with 25+ International certification in Welding, NDE and In Service Inspection.
Daily Aims
Day 1
- BENCH-MARK QUIZ INTRODUCTION TO API 570 CERTIFICATION
- ASME B 31.3 (Process Piping)
- ASME B16.5 (Pipe Flanges and Flanged Fittings)
Day 2
- ASME B16.5 (Pipe Flanges and Flanged Fittings)
- API 570 (Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems)
Day 3
- API 570 (Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems)
Day 4
- ASME Boiler and Pressure Vessel Code Section IX (Welding and Brazing Qualifications)
- ASME Boiler and Pressure Vessel Code Section V (Non-Destructive Examination)
- API Recommended Practice 574
Day 5
- API RP 571 (Damage Mechanisms in the Refining Industry)
Training Schedule
| Code | Start Date | End Date | Locations | Cost | Instructor |
|---|---|---|---|---|---|
| PST0194-202002 | 24 Aug, 2020 | 28 Aug, 2020 | USD 2335 | Uday B. Kale (M. Eng. Mechanical) | |
| PST0194-202101 | 29 Nov, 2021 | 03 Dec, 2021 | USD 2495 | Uday B. Kale (M. Eng. Mechanical) | |
| PST0194-202102 | 06 Dec, 2021 | 10 Dec, 2021 | USD 2495 | Chintamani M. Khade | |
| PST0194-202201 | 27 Jun, 2022 | 01 Jul, 2022 | USD 2570 | Chintamani M. Khade | |
| PST0194-202202 | 18 Jul, 2022 | 22 Jul, 2022 | USD 2570 | Uday B. Kale (M. Eng. Mechanical) |
Why Choose This Training
Credibility
Align with API/ASME standards. Trusted by major operators.
Expert Instructors
Led by industry veterans with real field experience.
Real Case Studies
Practical application of concepts through real world scenarios.
Practical Skills
Hands on calculations and decision making for FFS outcomes.
Trusted by Operators
Delivered to Aramco, ADNOC, SABIC, and other major operators.
Global Training Standard
Recognized across major industries by PetroSync's proven approach.
Professional Training Aligned with Industry Standards
Practical, industry ready training designed for real work environments
Free Consultation
Limited seats available
Frequently Asked Questions
-
Direct Transfer
PetroSync Global Pte Ltd Bank Details:
- Account Name: PetroSync Global Pte Ltd
- Bank Name: DBS Bank Ltd
- Bank Code: 7171
- Bank Swift Code: DBSSSGSGXXX
- Branch Code: 288
- Account No: 0288-002682-01-6-022 (USD)
- Bank Address: 12 Marina Boulevard, Level 3, Marina Bay Financial Centre Tower 3, Singapore 018982
-
Terms & Conditions:
- For payment via direct telegraphic transfer, clients must bear both local and overseas bank charges.
-
Credit Card:
Terms & Conditions:
- A 4% credit card processing fee applies for credit card payments.
- Delegates who cancel after the training has been officially confirmed via email are required to pay the full course fee, and no refunds will be granted. However, you may substitute delegates at any time as long as reasonable advance notice is given to PetroSync.
- If PetroSync cancels, postpones, changes the trainer, or alters the training location (classroom/virtual) for any reason, and the delegate is unable or unwilling to attend on the rescheduled date, a 100% credit voucher of the paid contract fee will be issued. This credit voucher can be used for another PetroSync training program, subject to mutual agreement, within one year from the postponement date.
- PetroSync is not responsible for any loss or damage resulting from the cancellation policy and assumes no liability if the event is canceled, rescheduled, or postponed due to force majeure (e.g., natural disasters, war, government actions, industrial actions).
If PetroSync cancels, postpones, changes the trainer, or alters the training location (classroom/virtual) for any reason, and the delegate is unable or unwilling to attend on the rescheduled date, a 100% credit voucher of the paid contract fee will be issued. This credit voucher can be used for another PetroSync training program, subject to mutual agreement, within one year from the postponement date.
Yes, participants who complete the training will receive either an attendance certificate or a completion certificate, depending on the course requirements.
Yes, PetroSync courses adhere to international standards , with expert instructors in fields such as API, ASME, Reliability, and Drilling & Well Engineering.
Yes, PetroSync certificates are widely recognized and can be used to fulfill professional development and certification requirements across various industries.
Yes, PetroSync offers customized training programs tailored to your organization's specific needs (In-house Training).
Participants will receive comprehensive training materials , including slides, handouts, and direct learning from experts with case studies related to the training topic.
PetroSync trainers are industry experts with extensive experience as instructors and consultants in their respective fields, providing professional training with a strong background in the industry.
Yes, trainer profiles, including their qualifications, experience, and expertise, are available on the website: https://www.petrosync.com/training/.
Online training sessions are conducted via user-friendly platforms such as Zoom Premium.
To access PetroSync Online Training, participants need:
- A computer or laptop (tablets or smartphones are not recommended)
- A reliable broadband internet connection (minimum 4 Mbps)
- A webcam and a headset
- Any internet browser (Chrome browser recommended for a better experience)
- A reasonably quiet place
Yes, PetroSync provides live Q&A sessions with instructors to address real-world challenges encountered during training.
The average number of participants varies depending on the topic and participants’ schedules.
- The information you provide will be safeguarded by PetroSync and may be used to keep you informed of relevant products and services.
- As an international group, we may transfer your data globally for the purposes indicated above.
- If you do not wish to share your information with other reputable companies, please tick the box on the registration form.
Please fill out the form on the designated page first. Our team will reach out to you within a maximum of 2x24 hours.
The latest training schedule is available on the website: https://www.petrosync.com/training/.
