Applied Safety Metrics and Measures
While learning what metrics are available in the O&G industry is important, the most crucial part is on what you do with the information that you have.
- Level
- Intermediate
- Type
- Classroom
Trusted by Leading Companies
Our training programs are promoted to engineers, supervisors, and technical teams across the globe, supporting their continuous development and operational competency.
About Training
While learning what metrics are available in the O&G industry is important, the most crucial part is on what you do with the information that you have. This program will not only equip participants with the knowledge on what metrics to use, but also with the skills on how to utilize these data for the improvement of your safety & business performance.
Quantitative and qualitative safety metrics will be tackled. Participants will learn about trailing indicators & leading indicators, which will be useful for revealing safety improvement opportunities. Moreover, Delegates will learn about economic and technical ratios, system audits, composite formulations, and statistical and partial maintenance productivity indices. No specific set of metrics can be applicable to all operational activities. As such, this course takes an “adaptive” approach, focusing more on how you can apply metrics which best fit your operations. Case studies and intensive work sessions will be conducted to provide an avenue for knowledge exchange among industry peers.
Training Objectives
- IDENTIFY leading and lagging indicators to sustain safety standards within your company
- DEVELOP both retrospective and prospective way of looking at safety through measurable incident indicators
- INTEGRATE measurable metrics that best-fit your safety system
- BENCHMARK to best industry practices and evaluate how to adapt these metrics to current process safety programs
- KNOW what types of data are used for safety measurements and their implications
Audiences
This training is specially designed for those who are involved with safety systems management, operations & maintenance safety management, and safety monitoring and reporting:
- HSE Managers/Engineers/Executives
- Project Managers/Engineers/Executives
- HR & Training Managers/Executives
- Operations Managers/Engineers
- Safety Engineers
- Team Leaders & Department Heads
Instructor
Deborah L. Grubbe, P.E., CEng
Deborah Grubbe is a well-known consultant with over 30 years of experience in disciplined operations of manufacturing, safety, and engineering across industries including the oil and gas. She has served as Vice–President of Group Safety for BP Global in London, and her term in BP was considered to be the safest years ever for the company. She has also served as Vice-President for Safety Change Management in BP in the US, handling 5 refineries which had the highest need for safety improvement. Moreover, she is well-experienced in the characteristics of safe operations during her 27 years at DuPont. She has held corporate director position in safety, operations, and engineering. Aside from her industry experience, she is also a lecturer for Process Safety Management at Purdue University since 2008.
Her organizational affiliations spans across governmental, industrial and technical, and education bodies:
- US National Safety Council, Board of Trustee (Present)
- International Safety Council, Board of Directors (Previous)
- American Institute of Chemical Engineers, Board of Directors (Previous)
- Center for Chemical Process Safety (Previous)
- National Society of Professional Engineers, Vice Chair (Previous)
- State of Delaware Registration Board for Professional Engineers (Previous)
- American Society of Safety Engineer Member (Present)
Deborah Grubbe is currently the owner and principal consultant of Operations and Safety Solutions LLC, a consultancy firm which specializes in safety and operations troubleshooting and support, with her major clients including Shell and Dupont. She also serves in Purdue University College of Engineering as member of Dean’s Advisory Council, Process Safety Management Course Developer, and Lecturer. She is currently a member of the Board of Advisors and a lecturer for the University of Alabama-Birmingham Advanced Safety and Engineering Management Master’s Program.
Daily Aims
Day One: Purpose of Safety Metrics, Types & Tools In Safety Measurements
- Introduction
- Purpose of Workshop on Metrics and Measurements
- Why do we take measurements?
- Common Forms of Measurements
- Common Errors in Measurements
- Management Science and the Drive to Measure
- Types of Measurements
- Tools Used in Measurements
- Types of Lagging Indicators (Retrospective)
- Types of Leading Indicators (Prospective)
Day Two: Management & Frequency of Safety Measurements
- Review of Work Session: Group discussion on current safety metrics implemented in your company.
- Near-Miss Management
- Rate Adjusted Metrics
- Industry Process Safety Metrics & Their Implications
- Frequency of Data Measurement
- Representing and Sharing Data
- Significance and Data Analysis
- When Management Fails to Understand or Misleads
- When Stakeholders Fail to Understand or Encourages
- How Corporate Structures address and work with Measures
- Process Industry Trends in Metrics and Measures
Day Three: Safety Metrics & Business Continuity Improvement
- Review Case Study 2
- Using an Example of how US Chemical Safety Board uses metrics to improve
- Continuous Improvement
- Continuous Improvement Case Studies
- Using Data to Set Goals
- Choosing a CI System
- Next Steps for Your Firm’s Metrics and Measurements Effort
- Summary & Conclusion
Training Schedule
| Code | Start Date | End Date | Locations | Cost | Instructor |
|---|---|---|---|---|---|
| PST0266-201501 | Kuala Lumpur, Malaysia | SGD 3,995 | Deborah L. Grubbe, P.E., CEng | ||
| PST0266-201401 | Kuala Lumpur, Malaysia | SGD 3,995 | Deborah L. Grubbe, P.E., CEng | ||
| PST0266 | Kuala Lumpur, Malaysia | SGD 3,995 | Deborah L. Grubbe, P.E., CEng |
Why Choose This Training
Credibility
Align with API/ASME standards. Trusted by major operators.
Expert Instructors
Led by industry veterans with real field experience.
Real Case Studies
Practical application of concepts through real world scenarios.
Practical Skills
Hands on calculations and decision making for FFS outcomes.
Trusted by Operators
Delivered to Aramco, ADNOC, SABIC, and other major operators.
Global Training Standard
Recognized across major industries by PetroSync's proven approach.
Professional Training Aligned with Industry Standards
Practical, industry ready training designed for real work environments
Free Consultation Limited seats available
