ASME B31.3 - Process Piping Code Design Requirements Online Training
ASME B31.3 course covers process piping code & its practical use for all aspects from design to testing. This 5-day training is held in Indonesia and Malaysia.
- Level
- Intermediate
- Type
- Online
Trusted by Leading Companies
Our training programs are promoted to engineers, supervisors, and technical teams across the globe, supporting their continuous development and operational competency.
About Training
Important code requirements will be explained in a simple, straightforward manner, including the short-cut methods in designing Pipes, Pipe fitting, and Flanges. The participants would be explained in detail the mechanics of adopting and applying the code rules for day-to-day use in their professional work. Lessons are enhanced by actual in-class problem solving, directly applying the rules and equations of the B31.3 Code for various design and operating conditions. This training course is the complete answer to the demands of piping engineers to know the ASME B31.3 Pressure Piping Code and Upon completion of the training course, the participant shall be a complete ASME Code Professional.
Training Objectives
Familiarize participants with the organization and intent of the B 31.3 code
Know how to read the code, and interpret its stated and implied requirements
What issues to take into consideration when designing process piping
Pressure design of piping and piping components
How to analyze piping flexibility and gauge the limitations of piping and piping components
Provide participants step-by-step approach to piping design, including the design optimization techniques.
Introduce participants to various material selection, fabrication, erection, and testing of piping systems.
Be able to understand the mandatory requirements, specific prohibitions, and optional stipulations given in the code and other service restrictions on piping systems.
How to conduct and certify the pressure testing.
Understand principles of piping integrity assessments as per API 570 and make run-repair-replace decisions.
Know how to calculate the Remaining life and MAWP of the piping system
Audiences
Instructor
Mandar Mulay
Mandar Mulay has about 20 years hands on experience in design and integrity assessment of Piping Systems, Reactors & Storage Tanks, Pressure Vessels, Power Boiler, and Heat Exchanger. He is well conversant with the major industry codes & standards such as ASME Sec. I, ASME B 31.1, B31.3 , B31.4 and B31.8, ASME Sec VIII, BS-5500, TEMA, API -650, IS 803, API 579, ASME PCC-2 etc.
Major projects closely associated with, in his professional career so far are, Qatar Chemicals, Shell, Castrol India, Reliance Industries, Cargill Foods USA, etc. His proficiency in Power Boiler, Piping and Pressure Vessel Codes enables him to trace the similarities and differences of these codes. He also actively involved as Instructor for programs on the subjects of ASME codes, Integrity Assessment, Fitness for Service, etc.
Along with his career in Engineering and Design Department in a multinational company at a very senior post for the last 20 years, he is also visiting faculty to a well known Engineering College in India for their P.G. Courses in Piping Design and Engineering
Apart from being visiting faculty, He has also conducted several Training Courses ( ASME Sec. I, ASME Sec. VIII, ASME B 31.3 Piping Codes , API 579 FFS code, ASME PCC-2 Repair practices, and Heat Exchanger Design Operations & Maintenance ) in Saudi Arabia, Qatar, Bahrain and UAE for engineers from companies like Saudi Aramco, SABIC group of Companies, Qatar Petroleum, ADNOC, BAPCO, DEWA, Gulf Petrochemicals etc. He has already conducted many times the training courses in API 579, where the participants rated him “Excellent” for these courses.
Daily Aims
Objectives and Intent of ASME B 31.3 Code
ASME B 31.3 Scope and Applicability
Understanding of the Codes, what means SHALL, SHOULD & MAY in Code
Code contents, Stated & implied stipulations in the Code
What are design conditions, design pressure & design temperature
What are various fluid services generally encountered
Definitions of Category D, M, U, Normal, and High-Pressure Services
Concept of Weld Strength reduction factor
Weld Quality factor
Allowable stresses and the basis for its calculations
Design of piping components for internal pressure
Design of piping components for External pressures.
Design of branch connections –reinforcements
Selection of Flanges
Design of pipe fittings such as elbows, tees, and blanks
Service Considerations in Design
Flexibility considerations
Case studies in flexibility calculations
Methods to incorporate flexibility in Piping Systems
U - loops, Expansion Joints
Extensive case studies on Piping Design
Piping Span Calculations
Selection of Supports and Hangers
Material Identification, Certification, and Traceability
Code-accepted Materials and material testing
Listed, unlisted materials
General requirements to be checked before selection of Material
Limitations imposed by code on materials
Impact testing requirements
Acceptance Criteria as per ASME B 31.3
Design interface with Fabrication, Assembly, and Erection
Code requirement for preheating and PWHT
Design interface with Inspection, Examination, and Testing
How to Conduct and certify pressure testing.
Hydrostatic testing of the piping system
Pneumatic testing of the piping system
Service leak test
NDT in lieu of leak test
Case studies
Additional Code requirements for special fluids services
Specific Design Requirements for Toxic Fluid (M Category) Services
Design Requirements for High-Pressure Fluid Services
Design Requirements for High Purity (U category) Fluid Services
Design Requirements for High Pressure ( Category K) Fluid services
Overview of flanges as per ASME B 16.5
Piping integrity assessments as per API 570
Making run-repair-replace decisions.
Calculation of Remaining life and MAWP of piping system
Real-world examples and case studies
Training Schedule
| Code | Start Date | End Date | Locations | Cost | Instructor |
|---|---|---|---|---|---|
| PST0270-202202 | – | USD 2,570 | Mandar Mulay | ||
| PST0270-202201 | – | USD 2,570 | Mandar Mulay | ||
| PST0270-202103 | – | USD 2,495 | Mandar Mulay | ||
| PST0270-202102 | – | USD 2,495 | Mandar Mulay | ||
| PST0270-202101 | – | USD 2,495 | Mandar Mulay |
Why Choose This Training
Credibility
Align with API/ASME standards. Trusted by major operators.
Expert Instructors
Led by industry veterans with real field experience.
Real Case Studies
Practical application of concepts through real world scenarios.
Practical Skills
Hands on calculations and decision making for FFS outcomes.
Trusted by Operators
Delivered to Aramco, ADNOC, SABIC, and other major operators.
Global Training Standard
Recognized across major industries by PetroSync's proven approach.
Professional Training Aligned with Industry Standards
Practical, industry ready training designed for real work environments
Free Consultation Limited seats available
