Petrophysics Operations Quality Control
No amount of fancy post-processing can really overcome problems caused by data which is bad from the start.
- Level
- Intermediate
- Type
- Course
Trusted by Leading Companies
Our training programs are promoted to engineers, supervisors, and technical teams across the globe, supporting their continuous development and operational competency.
About Training
No amount of fancy post-processing can really overcome problems caused by data which is bad from the start. Calibration and other wireline and/or MWD product quality problems discovered at the wellsite can usually be rectified.
Once a well has been cased, however, the best a wireline or MWD vendor can offer is discounted charges and/or credit against future work. We will work with the wellsite staff and the wireline and/or MWD vendors to ensure that the log data obtained is the highest quality possible.
The trainer will help participants understand logging measurements, logging operations, tool calibration and environmental corrections. The course will focus on log quality control on tool measurements and handling, data loading on IP software and practice application for curve editing. At the end of the course, the participant will have extensive knowledge of well logging and quality data logs.
Training Objectives
- Understand basics of Open and Cased Hole logging measurements
- Improve logging operations and tool calibrations
- Acquire knowledge on log quality control on tool measurements (log readings) and data handling
- Understand porosity tools measurements and determination
- Learn and practice curve editing (depth matching, despiking, splicing and multiple run merge)
- Understand data loading on Interactive Petrophysics (IP) software and it’s relation with log results
- Introduction to core analysis and loading of output parameters
- Practice application on Data-Base creation and loading digital, scanned or digitized data of different format using IP
- Practice application examples for curve editing using IP software
Audiences
The course is designed for all data management professionals who is handling and loading digital log data, new hired petrophysicists, geologists, geophysicists and reservoir, petroleum, drilling engineers whose job requires a more extensive knowledge of Well Logging
Instructor
Prof. Dr. Ahmed Taha Amin
Prof. Dr. Ahmed Taha Amin is an expert in formation evaluation, core analysis and reservoir modeling. He has broad experience working with assets and providing properties for reservoir characterisation and strong experience with carbonate petrophysics over 15-years experience.
He has extensive experience over 45 years in industry, principally in log analysis and Formation Evaluation in various technical and managerial positions for Gupco (Cairo, Egypt), Adco and Adnoc (Abu Dhabi, UAE), QGPC (Doha, Qatar), Apache (Cairo, Egypt), RPS Energy (in UK) and CEPSA in Egypt.
He is an instructor for Basic, Intermediate, Advanced Petrophysics, Core-Log Integration, Image Interpretation, IP software Application and LQC for Data Management training courses. He was supervised the Petrophysical studies and Wire-Line operations for Apache Egypt operated by: APACHE, QARUN and KHALDA Companies for 10 years. He did Petrophysical Evaluation projects in a few countries such as Algeria, Egypt, Yemen, Kuwait, Madrid, South Africa and East Asia.
Daily Aims
Day One
- Basics of Open and Cased Hole Logging
- Reservoir Rock Properties
- Open – Hole Logging Tools and Measurements
- Lithology Tools
Day Two
- Porosity Tools
- Resistivity Tools
Day Three
- Curve Editing
- Practical Application examples (Workshop) using IP Software
Day Four
- Coring and Core Analysis Data
- Log Quality Control
- Cased - Hole Logging Tools and Processing
- Geological Tools
- Other Tools
Training Schedule
| Code | Start Date | End Date | Locations | Cost | Instructor |
|---|---|---|---|---|---|
| PST0244-201501 | Kuala Lumpur, Malaysia | USD 3,595 | Prof. Dr. Ahmed Taha Amin | ||
| PST0244-201401 | Kuala Lumpur, Malaysia | SGD 4,995 | Prof. Dr. Ahmed Taha Amin |
Why Choose This Training
Credibility
Align with API/ASME standards. Trusted by major operators.
Expert Instructors
Led by industry veterans with real field experience.
Real Case Studies
Practical application of concepts through real world scenarios.
Practical Skills
Hands on calculations and decision making for FFS outcomes.
Trusted by Operators
Delivered to Aramco, ADNOC, SABIC, and other major operators.
Global Training Standard
Recognized across major industries by PetroSync's proven approach.
Professional Training Aligned with Industry Standards
Practical, industry ready training designed for real work environments
Free Consultation Limited seats available
