ASME Section VIII Division 1


Download Brochure
Wednesday June 10, 2020 | Mandar Mulay | Kuala Lumpur, Malaysia
WorldOils

Upcoming Course

Code Start Date End Date Location Cost Instructor Register
PST0419-202001  10 Jun 2020  12 Jun 2020  Kuala Lumpur, Malaysia  USD 2295  Mandar Mulay   Register

Past Course

Code Start Date End Date Location Cost Instructor Register
Wednesday June 10, 2020 | Mandar Mulay | Kuala Lumpur, Malaysia
This Three-day program offers detailed insight and thorough understanding of the most common ASME codes, pertaining to design/ engineering and testing of new pressure vessels namely Section  VIII Div. 1 and it’s relevant referencing codes. This course emphasizes understanding of ‘stated’ and ‘implied’ requirements (i.e. content and intent) of the codes. The participants would be explained in detail the mechanics of adopting and applying the code rules and design formulas for different Design conditions and Services. 
 
ASME VIII Div. 1 is a very commonly adopted code which is comparatively easier to use, in comparison to
ASME Section VIII Division-2.
 
This course is intended to give the participants the confidence and practice for carrying out design, fabrication and testing for new vessels and also will help to carrying out basic strength calculations. How to adopt code rules for different types of vessels and with various service conditions will be illustrated with case studies. Important code stipulation will be reviewed and discussed collectively with participants so as to address the difficulties and ambiguities they might have encountered during their working. This course will help the design engineers to assess the work of the suppliers/ vendors as regards to drawing and calculation review/ approval.
 
Over and all the course will make the attendees comfortable with the use of ASME codes and understand the basic concepts with better clarity. This will give the candidates a firm background for further studying in-service codes such as ASME PCC-2 or API-510.
Wednesday June 10, 2020 | Mandar Mulay | Kuala Lumpur, Malaysia

DAY 1

   

  • Introduction to ASME codes
  • Structure of ASME Sec. VIII Div. 1
  • ASME Code system : Code revisions, Editions
  • Pressure vessels included in ASME Codes
  • Pressure vessels excluded in ASME codes
  • Design  principles adopted in  ASME codes
  • Concept of working pressure, design pressure, MAWP
  • Allowable stress in ASME design
  • Weld joint categories
  • Weld  joint types
  • Concept of weld joint efficiency
  • Design of  cylindrical and spherical shells under internal pressure
  • Static head calculations
  • Types of dished heads.
  • Design of Ellipsoidal heads
  • Design of Torispherical heads
  • Design of Hemispherical heads
  • Design of Conical heads
  • Case Studies and examples

 

DAY 2

  • Nozzles and openings, reinforcement of openings
  • Adequacy of weld joints for shells and nozzles
  • Methods of design optimization, economical compliance.
  • Quality Assurance System as per ASME codes
  • Materials for pressure parts
  • Materials for non-pressure parts
  • Requirement of low temperature service
  • Deciding impact test requirement
  • Impact test acceptance criteria
  • Fabrication requirements
  • Tolerance on weld reinforcement / mis-align ments / fit-ups
  • Weld joints in shells and nozzle attachments

 

DAY 3

  • Deciding PWHT requirement
  • PWHT methods and procedures
  • Deciding nozzle orientations / man-ways/ inspection openings
  • NDT of pressure vessels and selection
  • Code requirement for radiography
  • Acceptance criteria for elongated and rounded indications
  • PT and MT requirements
  • Acceptance criteria for PT and MT
  • Hydrostatic and Pneumatic Tests
  • Calculating test pressures, Inspection pressures, pressurization stages
  • Vessel stamping and Name plate
  • Introduction to Integrity assessment of in-service vessels
  • Doubts and discussions/ Quiz and feedback

 

Wednesday June 10, 2020 | Mandar Mulay | Kuala Lumpur, Malaysia
  • Familiarize participants with the concepts and technical terms of the codes
  • Know the basic concepts of the codes and their design fundamentals
  • Understand salient features and differences between Div 1 and Div 2
  • Know the design of Shell, Heads, and other pressure parts
  • Learn design of nozzles and nozzle reinforcements
  • Design for external pressure and Jacketed vessels
  • Design requirements for low temperature operation
  • Discover the fabrication requirements, assembly and welding requirements. 
  • NDT and Inspection procedures
  • How to carry out pressure testing, certification and stamping of Pressure Vessels.
  • General introduction to Integrity assessment of in-service vessels
Wednesday June 10, 2020 | Mandar Mulay | Kuala Lumpur, Malaysia

The course is designed for, but not limited to, mechincal, maintenance, and inspection / QAQC
professionals who are involved in pressure vessel equipment.

  • Design Engineers / Managers
  • Mechanical Engineers / Managers
  • Maintenance Engineers / Managers
  • QAQC Engineers / Managers
  • Inspection Engineers / Managers
  • Reliability Engineers / Managers

Each attendee must bring a Laptop computer with Microsoft operating system and Scientific Calculator

Wednesday June 10, 2020 | Mandar Mulay | Kuala Lumpur, Malaysia

Mandar Mulay

Mechanical Engineer

Biography


Mandar Mulay has about 20 years hands on experience in design and integrity assessment of Piping Systems, Reactors & Storage Tanks, Pressure Vessels, Power Boiler, and Heat Exchanger. He is well conversant with the major industry codes & standards such as ASME Sec. I, ASME B 31.1, B31.3 , B31.4 and B31.8, ASME Sec VIII, BS-5500, TEMA, API -650, IS 803, API 579, ASME PCC-2 etc.

Major projects closely associated with, in his professional career so far are, Qatar Chemicals, Shell, Castrol India, Reliance Industries, Cargill Foods USA, etc. His proficiency in Power Boiler, Piping and Pressure Vessel Codes enables him to trace the similarities and differences of these codes. He also actively involved as Instructor for programs on the subjects of ASME codes, Integrity Assessment, Fitness for Service, etc.

Along with his career in Engineering and Design Department in a multinational company at a very senior post for the last 20 years, he is also visiting faculty to a well known Engineering College in India for their P.G. Courses in Piping Design and Engineering

Apart from being visiting faculty, He has also conducted several Training Courses ( ASME Sec. I, ASME Sec. VIII, ASME B 31.3 Piping Codes , API 579 FFS code, ASME PCC-2 Repair practices, and Heat Exchanger Design Operations & Maintenance ) in Saudi Arabia, Qatar, Bahrain and UAE for engineers from companies like Saudi Aramco, SABIC group of Companies, Qatar Petroleum, ADNOC, BAPCO, DEWA, Gulf Petrochemicals etc. He has already conducted many times the training courses in API 579, where the participants rated him “Excellent” for these courses.